| 0:00 |
"Welcome to our first ACADEMY OF TONE Livestream" |
| 3:15 |
Footswitches with and without LEDs that work with AMP1 |
| 6:10 |
Preset Mode and MIDI explained |
| 10:00 |
How to program the internal footswitches |
| 14:43 |
How to combine internal footswitches with an external footswitch |
| 17:30 |
Thomas' tip on using the 4 channels |
| 21:08 |
Programming the FX-loop on/off into a preset |
| 24:45 |
!!! Iridium only !!! - Turning off the speaker simulation |
| 26:04 |
What 2 button LED footswitch is Thomas using? |
| 27:09 |
Can BluBOX also work as a DI? |
| 33:07 |
Can I turn off the IR in the BluBOX? |
| 34:30 |
Until which master volume I may usw a 50 W speaker - and in comparison to your FATcab: does it work with a loud rock band |
| 40:24 |
How to engage the half power mode and what is it? |
| 44:10 |
Can I use the output from AMP1 with headphones or do I need an external headphone amp to do that? |
| 44:43 |
Do 100 W mode on master 5 sounds different than 50 W at master 10? |
| 48:24 |
Thomas shows his combo idea for the AMP1 |
| 54:00 |
How to get the VOX AC30 tone out of AMP1? |
| 55:47 |
How about a drive pedal with nanotube technology? |
| 56:55 |
Any updates on AMPX? |
| 58:50 |
How will Blugprints work on the AMPX? |
| 1:02:48 |
When you do the AC30 comparison, could you take a Brian May guitar? |
| 1:13:17 |
Hi Thomas, I live in a hot climate, will it not harm the amplifier during prolonged work? |
| 1:04:46 |
Why do I have to place a cabinet on the floor? |
| 1:08:40 |
What is the nanotube and how/why do we use it in our amps? |
| 1:11:00 |
Do you have a plan to make MIDI1 cable with angled plug? Shop-BluGuitar-MIDI1
|
| 1:12:35 |
Hi Thomas, what's your view on putting the AMP1 through a P.A. system? |
| 1:14:53 |
When would I want a NANOcab vs a FATcab? |
| 1:16:33 |
Hey Thomas, do you prefer the silver edition or the mercury edition for your playing? |